The contest is workflow, colour and production data

# The contest is workflow, colour and production data The quote for the new press is still on the desk, and it is a handsome quote. Faster makeready, plate handling that doesn't need a second pair of hands, a console that looks like the one you saw at the show. The plant down the road

The contest is workflow, colour and production data

The quote for the new press is still on the desk, and it is a handsome quote. Faster makeready, plate handling that doesn't need a second pair of hands, a console that looks like the one you saw at the show. The plant down the road bought something like it last spring. Their feeder is quieter than yours. None of that tells you whether they can find a job when a buyer rings at four, whether a reprint matches the pack on the shelf, or whether they know what the last job cost once the waste and the rework are in. Those three are the contest. A new machine can help them. It doesn't stand in for them, and a tour of a hall full of clever iron is a bad way to decide which plant is pulling ahead.

You're allowed to buy the press. If the old one is genuinely the thing that makes you late, if the crews are waiting on it, if the work is there and the colour and the paperwork are already boringly under control, then iron is the constraint and the quote is the conversation. A lot of quotes get signed in the other condition. The hall feels busy, the mood says capacity, and the lateness is actually a search, an argument about a green, and a price that was copied from a feeling. Another press will print the confusion faster. It will not find the pallet, settle the green, or tell you the job lost money.

Finding the job is a production skill

A buyer rang about a carton that should have been on a lorry. Three people answered, and the answers didn't match. Planning said it was printed and in finishing. Finishing said they were still waiting for the sheets. The minder said the sheets had gone to the aisle by the guillotine yesterday, or perhaps the day before, on a pallet with two other jobs because the truck was in use. The file the buyer was describing wasn't the file prepress had plated. A corrected version had arrived by mail, been saved into a folder with the word new in the name, and never replaced the ticket. Somewhere in that tangle the job existed. Nobody could put a hand on one version of it and say: this file, this pallet, this finishing instruction, this due time.

That search is the workflow, or the lack of it. Workflow isn't a brand of software and it isn't a robot at the feeder. It's the dull ability to treat one job as one job. The ticket, the file that was actually imaged, the stock, the plates or the digital queue, the colour aim, and the finishing note are the same number, and a person who wasn't here when it was planned can still find them. If any of those live in a different place, an inbox, a USB stick, a pencil on a docket, a memory, then you don't have a trail. You have a hall, and halls are large when a customer is waiting.

Software can hold that trail if you feed it the truth and refuse the side doors. The side door is the email that changes the quantity and never touches the ticket. It's the revised PDF that prepress uses because it was the latest, while the RIP still points at the previous one. It's the pallet that gets shared because separating them would take five minutes. Each side door feels small to the person opening it, and each one makes the next phone call into a search party. The plants that pull ahead aren't the ones with the most screens. They're the ones where a night lead can answer "where is it" without waking three people up.

You can hand a system a job number, a status somebody updates when the sheets actually move, a file name that matches the plates, and a location for the pallet that a person is willing to keep honest. You can't hand it a status that means "probably in finishing" or a file that is current only inside one person's mail. If half the state of the job lives in heads, the software will display a confident map of the wrong building. People will learn to ignore it, and then you'll be back to the phone call, with the added step of arguing about whose screen was lying.

Holding colour is the second contest

The reprint came in on a Tuesday, same brand, same board, a press that was newer than the one which had printed the pack on the shelf. The numbers in the console belonged to a proof. The buyer's complaint belonged to the pack, which they had brought with them, slightly scuffed, definitely the thing their shop was selling. The new minder was capable and had never seen the old job. The old minder had retired with the settings in his head and a drawdown in a drawer that nobody had measured. The sheet off the new press was clean, even, and, beside the pack, a different green. The console was ready to call the sheet good. The buyer wasn't.

Holding colour means you can get back to an agreed object, on a later day, on a different shift, and if you have to split the run, on a second press without starting the argument from zero. That wants a target someone signed, a way to measure the sheet you're about to ship, a press that will actually answer when you ask it to move, and a record so the next reprint isn't a fresh negotiation. A better console doesn't supply the signed object. If the aim in the system is a proof the brand has already walked away from, the console will help you repeat the wrong green very consistently. Consistency with the wrong reference is a special kind of waste. It looks like control right up until the pack lands on the desk.

This is where plants fool themselves with equipment. They buy the spectrophotometer, they buy the closed-loop conversation, and they still keep the real aim in a drawer, or in a sentence like "make it like last time". Last time may have been a compromise the buyer grudgingly wore. Last time's paper may be gone. Last time's minder may be the only person who knew the solid had been opened up to save a face in the same zone. None of that is in the instrument. The instrument will compare what you point it at. Point it at a target the commercial side has agreed, on the stock you print, and keep the signed sheet or the measured sample where the next crew can get it. Do that, and an older press will hold a reprint. Skip it, and the new press will give you a fresh argument with nicer graphs.

Split runs make the gap obvious. One form on offset because of a spot, the rest on digital because of a short version, and a brand that expects one green across both. You can hand the software both sets of readings. You can't hand it the political fact that the brand will judge the pair under shop light, on the made-up pack, not on two separate bars in two booths. Somebody has to look at the pair and decide which process moves. If that somebody doesn't exist, you'll ship two goods that are each "in tolerance" to a different aim, and the customer will be the first person to see them together.

The third contest is what the job cost

Everyone remembered the job as a good run. The press hadn't stopped. The delivery looked tall. The dashboard, such as it was, showed a busy machine. The invoice went out at the estimated price, and the estimator felt clever. A month later the paper account and the finishing spoils told a different story. Makeready sheets had been booked to a general code, because the job code on the counter had been wrong for the first hour. A reprint of two pallets, after the buyer rejected a glue-flap scuff, had been written up as a new small job with its own price, so the original job never wore the cost of its own failure. The plates for the corrected file were in the plate bill somewhere. Nobody had tied them back. The good run had lost money, and the next quote used the same price, because the price had "worked".

Knowing the cost is not a feeling about whether the shift was hard. It's the job number carrying the time, the waste sheets, the plates or the clicks, the board that was issued, and the finishing that was spoiled, including the rework you were tempted to hide under another ticket. Software can store that if the floor hands it across at the moment it happens. A counter left on the previous job for the first hour is a fiction you'll believe later, because the fiction is neat. A pallet of waste that goes to the bailer without a job number is a cost that will be spread across the month and blamed on "prices". The plants that pull ahead can open a finished job and say what it ate. They change the next quote. The plants that can't will keep a press busy in order to repeat a loss.

You can't hand a system a true cost if the estimate, the counter and the stock issue don't share a number. You can hand it impressions, a waste count somebody separates from good work, a plate tally, a click tally, and the hours finishing actually spent rather than the hours the ticket hoped for. You can't hand it the reason a buyer was given a credit, unless someone types the reason against the job instead of burying it in a mail thread. The credit is part of the cost. So is the Saturday call-in. A production system that stops at the delivery of the press will flatter every job that printed cleanly and wrecked itself later in the glue.

Iron is the easy story

There's a reason the new press is the story people prefer. You can stand next to it. You can hear it. A workflow that finds a job is invisible when it works, and a colour record is a dull folder, and a true job cost arrives too late to feel like heroism. Vendors, quite reasonably, demonstrate iron. Owners, quite reasonably, like to show iron to customers. The demonstration doesn't include the Tuesday phone call, the green beside the shop pack, or the invoice that should have been higher. If you let the demonstration set the contest, you'll spend the capital on the part of the problem a visitor can photograph.

Set the contest the other way round before you answer the quote. Can a person who wasn't on shift find the job, the right file, and the pallet. Can you reprint to a target the buyer already signed, without the retired minder in the room. Can you say what the last ten awkward jobs cost, including waste and rework, and is the next quote different because of it. If those are shaky, fix the trail, the aim and the job number before you add a machine to feed them. If those are solid and the press is still the thing that makes you late, buy the press, and enjoy it. The plants pulling ahead aren't the ones with the newest feeder. They're the ones that can find the work, hold the colour, and stand by the cost. The feeder is a tool they may also own. It isn't the contest.

Written by

Ruth Keller

Quality

Reads the sheet, the barcode and the proof, and says what she will not sign.

Related articles

Process

Flexo still fits packaging

# Flexo still fits packaging The buyer had been to a presentation, and he arrived wanting the range moved. Film, board, a family of labels, all of it, onto a di...

Process

Print on demand moves the stock and the cost

# Print on demand moves the stock and the cost The publisher showed me an empty bay and he was proud of it. A year ago the bay had held a title that sold steadi...

Process

Versioned packaging is a production problem

# Versioned packaging is a production problem Marketing called it a celebration. A commemorative sleeve, one brand, a dozen pictures, a few lines of type that c...

Process

Print that can be scanned, used and recovered

# Print that can be scanned, used and recovered The code scanned on the flat sheet. I watched the buyer's phone pick it up from the press table, quick and pleas...