Print that can be scanned, used and recovered

# Print that can be scanned, used and recovered The code scanned on the flat sheet. I watched the buyer's phone pick it up from the press table, quick and pleased, and I watched the same phone fail when she tried it on a made-up carton, thumb on the flap, crease running through the quiet

Print that can be scanned, used and recovered

The code scanned on the flat sheet. I watched the buyer's phone pick it up from the press table, quick and pleased, and I watched the same phone fail when she tried it on a made-up carton, thumb on the flap, crease running through the quiet space we had been so careful about on the artwork. The pack had a code, a use, and a promise that it could go back into recycling. Three duties, and the print had only been asked to satisfy the first one while the sheet was still flat. That is how these jobs go wrong. The scanner is the easy witness. The crease and the recovery are the ones that arrive later, when the carton is a carton.

Quiet space is a print decision

A code needs a patch of peace. On the artwork that peace is a white rectangle and a margin around the mark, and it looks obvious on a screen. On a press it is a place where something else always wants to live. A photograph bleeds. A legal line creeps. A varnish flood, laid because the brand likes the sheet to shine, runs straight over the patch and turns it into a glare. I have moved more codes in the last year than I have moved logos, and every move was a negotiation with someone who thought the rectangle was spare.

The size of that quiet patch is a print decision even when a designer drew it. Too small, and a normal press movement kisses the edge of the mark with something that doesn't belong there. Too close to a trim, and the guillotine or the die takes the margin the scanner was relying on. Too close to a glue flap, and the glue, or the fold, or a thumb, is the thing the phone sees. We ask for the code to sit on a panel that stays visible and stays clean after the pack is filled, closed, and handled. That sentence sounds mild. It deletes half the clever placements marketing proposes, including the one that straddles the opening because it "looks integrated."

Contrast is the other half of the quiet. A black mark on a pale, unprinted patch is boring and it works. A mark reversed out of a dark photograph is a mark that will fail under mill lights, let alone a warehouse. Grey type in the same panel, printed light because the brand book is shy, can be too shy for a scanner even when a person can still read it. I will put a solid under the code, and I will keep decorative colour out of the margin, and I will argue with the brand book. The phone does not have a brand book. It has a threshold, and a varnish sheen will push a marginal code over it on a Tuesday and not on a Wednesday, which is the sort of fault that makes everyone innocent and the job still wrong.

On film the quiet patch is often a printed white, because the film itself gives the scanner nothing to trust. That white has to be opaque enough, and it has to be in register with the code printed on it or beside it. A white that is starved, or a code that misses it by a little, becomes a code that works in the drawing and fails on the reel. We treat that white as image, not as a background someone forgot. It gets the same attention as the logo. If it doesn't, the logo is the only thing that will be right, and the logo is not what the buyer is now asking the pack to do.

Ink and coating meet the recycler as well as the eye

The second duty is recovery, and it is where a printer can do harm while doing a beautiful job. European packaging rules, and the buyers who have to live with them, are asking whether a pack can be sorted and recovered, and whether the way it is printed gets in the way. I am not the mill and I am not the sorter. I am the person who chooses an ink, a coating, and a coverage, and those choices turn up later in someone else's stream. A claim that the pack is recyclable has to survive the ink we actually laid, not the ink in the first design conversation.

Heavy coverage over a fibre pack is the ordinary risk. A carton that is mostly ink, plus a thick varnish, plus a film lamination because the product wanted a soft touch, is a carton we have made harder to recognise as fibre. I won't invent a threshold and call it a rule. I will say that when a buyer asks for recovery, we look at how much of the sheet is sealed under coating and how much is still, in any honest sense, board. A flood of decorative solid on every panel is a print decision with a recycling consequence. So is a metallic ink used as a background rather than as a small mark. Metallics and foils are the decorations buyers love and sorting lines struggle to love back. If the code is there to tell the public the pack can be recovered, the decoration cannot quietly make that instruction false.

Deinking and repulping are the mill's art, and different inks behave differently in it. Some inks let go of fibre more readily than others. Some coatings don't let go at all. I don't keep a private league table, and I don't sign a sentence that says our ink is "recycling ready" because a leaflet said so. What we can do is ask the ink maker, in writing, how this ink and this coating are meant to behave with this board or this film, and we can pass that answer to the buyer without improving it. If the honest answer is that the soft-touch laminate will sit in the stream as a problem, the laminate has to be a decision the brand takes with its eyes open. Printing it anyway, and putting a recycling mark in the corner, is how a code becomes a lie a phone can scan.

Film packs have their own version of the same honesty. A mono-material film that a buyer chose so the pack could be recovered can be undone by an ink system, an adhesive, or a label that the recovery route didn't assume. The code might be the smallest of those risks and still the one everyone stares at. We stare at the adhesive and the coverage as well. A printer who only defends the quiet zone has done the visible half. The pack is recovered, or not, as a whole object.

A code has to survive the crease

The flat sheet is a laboratory we control. The made-up pack is the object that gets scanned in a kitchen, on a line, in a shop. Creases break the quiet space. They also break the mark itself if someone has parked it on the fold because the panel was busy. A code that cracks along a score can look intact to the eye and fail to the phone, or it can fail both. We have started refusing to sign these jobs off the flat. A blank is creased, glued if the job is glued, and scanned the way a person will scan it, with ordinary light and a thumb in the way. If it fails, it fails in our building, which is the cheap place for it to fail.

Scuffing matters on a pack that is handled, and condensation matters on a pack that is cold. A varnish that protected the code from scuff may be the varnish that glared. A matt coating may scan and still scratch. There isn't a universal winner. There is a test on the finished structure, done before the run is so far along that changing the panel means reprinting the job. I want that test on the ticket, with a name, the way we already put a name next to colour. A code that has not been checked after converting is a code we hope will work. Hope is a weak process control.

The same discipline applies to a page, which is an easier object and still not a flat proof. A code in a gutter, a code that falls into the spine, a code under a spot UV that was meant to be clever: the magazine fails in its own ways. We fold a section before we call it passed. The buyer who scanned the plotter and went home satisfied is the buyer who will write to us from a copy that doesn't. I would rather annoy her at the press table, the way this job annoyed her, than after the copies are in the envelopes.

The use is the brand's, and the print has to bear it

A code is not a decoration with a function bolted on. It opens something: a refill, a return, an instruction, a trace of the batch, a page that tells the holder how the pack is meant to be sorted. The printer doesn't own that destination, and we get into trouble when we behave as if printing the mark were the same as providing the use. If the page behind the code is empty, wrong, or contradictory, the best-printed mark in Europe is a small machine for producing complaints. We ask, before we plate or rip, what the code is supposed to do, and what happens if a person does it.

That question is sharpest when the use is recovery. The mark, the instruction, and the pack have to agree. A code that tells a holder to put the pack with paper, on a pack that is a laminate we all know will not behave like paper, is not a print detail. It is a claim. We will print a claim the buyer will stand behind in writing. We won't invent one to fill a corner of the layout, and we won't add a recycling symbol because the layout looked unfinished. European packaging rules have made casual symbols expensive. The expense doesn't always arrive as a fine in our post. It arrives as a buyer who has to recall a sentence we helped him print.

Batch and trace codes have a humbler use and a stricter production demand. They change. A static artwork with a live code beside it is a different job from a static artwork that only had to be pretty. The quiet space has to survive whatever process lays the changing mark, inkjet or digital or a wheel, and that mark has to be readable after the same crease and the same varnish. We decide which process prints the variable part before we lock the design. A code added in a hallway, after the varnish, is how you get a mark that sits proud, smears, or scans on Monday and not after the filler.

What we ask before the file is blessed

The conversation I want is earlier than the press table. Where does the code sit once the pack is creased and closed. What is the quiet patch, and what is forbidden from entering it, including varnish. Which ink and which coating, and what has the ink maker actually said about recovery on this material. What the code opens, and whether that destination matches the pack we are making. Who scans a converted sample, and who is allowed to stop the job if the phone fails.

Those questions are the print consequence of a small square. They don't require a new press. They require the artwork to give up some noise, the brand to give up a coating it may love, and the plant to refuse a sign-off on a flat sheet. The buyer on this job was cross for a few minutes and then glad, because the crease had told her the truth while we could still move the mark onto the panel beside the flap. We reprinted the flat, we made up a dozen, and the phone read them with the flap folded and a thumb in the ordinary place. The recycling sentence stayed off the pack until the mill's note and the ink maker's note said the same thing the layout was implying. The code works. The use has a page that matches the carton. The recovery is a statement we can hand over, rather than a symbol we hoped would be true because it scanned.

Written by

Tom Ellis

Finishing

Cuts, folds, glues and binds the work after it leaves the press.

Related articles

Process

Flexo still fits packaging

# Flexo still fits packaging The buyer had been to a presentation, and he arrived wanting the range moved. Film, board, a family of labels, all of it, onto a di...

Process

Print on demand moves the stock and the cost

# Print on demand moves the stock and the cost The publisher showed me an empty bay and he was proud of it. A year ago the bay had held a title that sold steadi...

Process

Versioned packaging is a production problem

# Versioned packaging is a production problem Marketing called it a celebration. A commemorative sleeve, one brand, a dozen pictures, a few lines of type that c...

Process

The energy argument around short-run digital

# The energy argument around short-run digital Sales had a slide with a pile of makeready sheets on one side and a tidy digital delivery on the other. The engin...