What to move first when slur shows on corrugated preprint
When slur shows on corrugated preprint, reduce impression or check for slip first. Do not raise the screen ruling first. Change only this one thing, then look again at the same place. The dots stretch in only one direction.
When slur shows on corrugated preprint, reduce impression or check for slip first. Do not raise the screen ruling first. Change only this one thing, then look again at the same place. The dots stretch in only one direction.
Move one thing first
If type is smeared or the barcode is distorted, stop. On corrugated preprint, if it has already hit the barcode or the large product name, stop first and then adjust. Do not trial it while printing. Dot gain grows all around. It is not a one-direction tail.
Order
| Do this first | Do not | Why |
|---|---|---|
| Reduce impression or check slip. Do not raise the screen ruling first. | Change ink, pressure, and speed together | Change three things and you will not know which one worked |
| It has already landed on the barcode or the large product name | Trial it while the job is still running | Waste keeps going |
| Note the color, the impression, and the speed. | Only say that it was adjusted | The next shift cannot pick it up |
Leave a record
- Reduce impression or check slip. Do not raise the screen ruling first.
- At the same place, confirm whether the slur has eased.
- Note the color, the impression, and the speed.
