Saving steps is not the same as deciding better

# Saving steps is not the same as deciding better The imposition built itself. Same trimmed size as last month, same pagination, the imposition software dropped the pages into the form and the prepress lead checked it instead of constructing it. That hour is gone, and it should be gone. Down on the press the

Saving steps is not the same as deciding better

The imposition built itself. Same trimmed size as last month, same pagination, the imposition software dropped the pages into the form and the prepress lead checked it instead of constructing it. That hour is gone, and it should be gone. Down on the press the ink keys opened from the coverage file, close enough that the minder started from a sheet rather than from a washed duct. The delivery note printed from the ticket. Nobody retyped the address. These are saved steps, real ones, and a plant that sneers at them will stay slow out of pride. They are also not a decision. The decision had happened the day before, when the estimator took the job. The form filled in quickly. The price came off the rate card. The awkward parts, a board the plant had never run and a finishing house already running late for someone else, were a sentence in the notes. The job was accepted because accepting had become a short piece of typing.

That's the blur. Automation removes keystrokes. A decision about whether to take the work, which press should run it, and what waste you're willing to wear, is still a person. Mix the two up and you'll get faster at the wrong yes. Keep them apart and the saved steps become what they actually are: time given back, which you can spend on the decisions, or spend on more typing of a different kind. The second choice is common. The first is the one that changes the plant.

What a removed keystroke is

Be specific, or "automation" becomes a mood. A removed keystroke is a repeat imposition that no longer has to be dragged into place by hand. It's a coverage file that sets a starting key instead of a minder walking the duct from zero. It's a wash-up routine the press will run while the crew fetches the next plates. It's a pallet label that matches the ticket without someone copying a job number across. It's a plate that arrives at the press with the job name readable on it, because the platesetter and the ticket finally agree. None of this decides whether the job should exist. All of it decides how much of a person's morning is eaten by copying.

You can feel the gain in a week, and you should say so, because crews notice when a promise of less typing turns out to be a second screen they have to feed. If the imposition still needs an hour of repair, you haven't removed the step. You've moved it. If the preset is so often wrong that the minder zeros it, the keystroke has returned in a sourer form. Saved steps have to survive contact with the work. When they do, bank them. Don't describe them as judgement. A correct imposition of a standard booklet is care, and it is also a pattern a machine can hold. Calling it a decision inflates it, and then the real decisions, which are messier, get described in the same sentence and slip through unexamined.

The floor can hand this layer a stable pattern. Page size, a fold that you do every day, a stock code, a coverage map that matches the plates, an address that is already on the customer record. It can't hand over a one-off die, a file the customer built badly, or a colour that has no agreed aim. Those still take a person, and they should, and they aren't a failure of the automation. They're the remainder. A plant that tries to automate the remainder with the same enthusiasm it automated the booklet will either jam the easy path or pretend the remainder is easy. Pretending is how the awkward job gets a standard imposition and a standard waste allowance, neither of which fits.

Whether you take the job

The rate card can propose a price. It can add the board, the clicks or the plates, the makeready allowance you usually use, the finishing line you usually run. That's a calculation, and it's useful, and it's the start of a decision rather than the decision. Taking the job is a judgement about risk the card doesn't hold. The brand manager who rejects two rounds and pays for one. The board you've never put through the feeder, which may be fine or may give you a week of misfeeds the allowance can't cover. The varnish that has to be done by a trade house which, this month, is already failing someone else's date. The file that looks complete and will explode at the die, because the glue flap was drawn by a designer who doesn't buy glue.

A person takes that in, or doesn't. If the estimating screen makes the yes feel like the normal end of the form, you'll take work you used to think about. Speed of quoting is a competitive fact. Customers do give work to the plant that answers. Answering quickly with a price you haven't stress-tested is a different sport from answering quickly with a price a person has stood behind. The tell is in the notes. If the awkward part is a comment, and the comment doesn't change the number or trigger a conversation, the comment is decoration. The decision was the default yes.

You're allowed to take risky work. Plants live on some of it, priced properly, with eyes open, sometimes because the customer is worth the bruise. That's still a decision, and it should leave a mark in the record: we took this knowing the board was new, we added a waste allowance we can defend, we'll look at it after. A default yes leaves no mark. When the job hurts, it looks like bad luck. It was a keystroke. The software did the keystroke correctly. It priced the fields it was given. It was never going to know that this buyer treats a proof as a suggestion and the press as the place they'll invent the colour.

Review the yes and the no, not the speed of the form. Once a week, look at jobs you declined and jobs you took that scared somebody in the room. If you never decline, the form has become the estimator. If you decline only by forgetting to reply, you don't have a decision process. You have avoidance, and avoidance doesn't teach the rate card anything. The card gets better when a person overrides it and writes why. "We added for the trade-house risk." "We refused the board." Those sentences are the craft. The automatic price underneath them is the saved step. Keep both, and don't let the second name itself as the first.

Which press, and what waste you'll wear

A routing rule can propose a press. Under a quantity, on a known stock, send it digital. Above that, or with a spot the digital press doesn't carry, send it offset. With a varnish the coater can lay, keep it in house. The proposal is a saved argument on the ordinary job, the same way the imposition was. The decision is the job the rule mishandles. The colour you already missed on a digital trial. The board that feeds and scuffs. The offset press that's down, and a job you could move if someone accepts a longer makeready and says so. The spot that means a wash-up on one machine and a profile argument on the other, with a buyer who will stand in the aisle and look at both.

Someone has to own the override. If overriding feels like vandalism, the crew will follow the rule and wear the reprint, because a reprint can be blamed on the job and an override is blamed on the person. That's how a saved step becomes a worse decision with a clean audit trail. The trail shows the rule was followed. The sheet shows the green was wrong. You want the trail to show the override too, with a reason, so next month's rule can learn the category. Learning here is a person editing a rule. It isn't the software discovering wisdom it was never given.

Waste is the decision people most like to pretend is a number. The estimate holds an allowance. The allowance was a judgement once, made calmly, and then it became a field, and now it feels like a fact about the job. On the night the allowance starts to disappear. A feeder doubles. A colour won't settle. The counter, if you've wired it, can show the count climbing past the figure in the ticket. Showing isn't deciding. The decision is to stop and fix, to run and wear the sheets, or to ring the buyer before the wear becomes a surprise on the invoice. Each of those is right in some rooms and wrong in others. A long-standing customer with a late promotion may want you to run. A job you underpriced may need to stop, because every extra sheet is money you already failed to charge. The press can't know which room it's in. The minder shouldn't have to guess the margin in the middle of a breakdown.

Name the person who may spend the allowance, and the person who has to be woken when it's gone. Often that's the estimator or the production lead, not the console. Give them a number they trust, from a counter checked against a pile, tied to the right job. Then leave the choice with them. A plant that automates the count and leaves the choice unnamed will keep feeding, because a press feeds, and the allowance will turn up later as a row in a report nobody reads on a Friday night. The report is a saved argument about what happened. It isn't a decision about what to do next.

Don't let one word cover both

You want the keystrokes gone and the decisions still argued. Those are two projects, and they finish at different speeds. The imposition can start saving you time in a month. The habit of reviewing refusals, overrides and stopped runs takes longer, and it doesn't photograph well. A plant that celebrates "we automated estimating" and then takes bad work faster has completed the first project and called it the second. A plant that still argues every job on paper, and still retypes every docket, may be deciding well and bleeding hours. Copying the hours isn't a virtue. Losing the argument isn't a modernisation. You can fix the copying without retiring the argument.

If you need a test that doesn't depend on a brochure, use the diary. In it, somewhere, a person refused a job and the refusal changed what estimating does next time. A person sent a job to the press the rule didn't choose, and the reason is on the ticket. A person stopped a run because the waste was enough, and the customer conversation happened before the invoice. Beside those, the ordinary jobs went through with fewer keystrokes than last year. If the diary only shows the keystrokes, you bought speed. Speed is worth having. It isn't the same purchase as judgement, and the sheet will keep the difference even when the report has blurred it.

Written by

Daniel Okonkwo

Works office

Turns an enquiry into a job bag, and a finished pile into a delivery.

Related articles

Industry

Buyers want shorter dates and clearer proof

# Buyers want shorter dates and clearer proof Her email had three questions and a date that had moved in by a week. Could we deliver sooner. Could she see where...

Industry

Recycled consumables and taking them back

# Recycled consumables and taking them back The form asked if we take material back. Plates, blankets, ink tins, solvent, cores. Sales had already ticked yes, b...